Pure Octane Fabrication

Pure Octane Fabrication Custom fabrication, precise welding, repairs and custom metal art.

Lift fixture for a big ass HVAC evap coil. Have to still make sure the welds are on point! Always take pride in your wor...
10/26/2017

Lift fixture for a big ass HVAC evap coil. Have to still make sure the welds are on point! Always take pride in your work no matter if it's being hidden or seen! #arc_zone #weldporn #weldlicous #weldernation #bluedemon @ArcZone @bluedemonweld

304 stainless handle welded to 1018 sheet steel, welded with 309 rod. It's a scrapper to clean out the catch tray on the...
06/22/2017

304 stainless handle welded to 1018 sheet steel, welded with 309 rod. It's a scrapper to clean out the catch tray on the horizontal bandsaw.

Legs for hvac carts cut, prepped, fitted and tacked all ready to weld!
06/22/2017

Legs for hvac carts cut, prepped, fitted and tacked all ready to weld!

I definitely prefer TIG welding over anything else, but doesn't mean I can't make my MIG welds look like dimes done by T...
06/22/2017

I definitely prefer TIG welding over anything else, but doesn't mean I can't make my MIG welds look like dimes done by TIG welding!

Don't always TIG weld, have to MIG weld parts if required. But still have to make it look Good! Leg and base plate for a...
06/22/2017

Don't always TIG weld, have to MIG weld parts if required. But still have to make it look Good! Leg and base plate for a fixture cart.

When I'm not welding I'm brazing copper hvac pipe together. That is 1-1/8" pipe brazed with 45% silver rod, 100% filled ...
06/22/2017

When I'm not welding I'm brazing copper hvac pipe together. That is 1-1/8" pipe brazed with 45% silver rod, 100% filled and nicely capped.

Basic repair job, mounting bracket in the wrong place. Cut off and placed correctly then TIG welded with 308.
06/22/2017

Basic repair job, mounting bracket in the wrong place. Cut off and placed correctly then TIG welded with 308.

Starting pass and final fill/cap pass on the train break test mounting bracket.
06/22/2017

Starting pass and final fill/cap pass on the train break test mounting bracket.

Hvac panel extension to fit new style compressor 304 ss TIG welded with 308
06/22/2017

Hvac panel extension to fit new style compressor 304 ss TIG welded with 308

Set of 4 drain plugs had to weld the 1018 steel handles on.
06/21/2017

Set of 4 drain plugs had to weld the 1018 steel handles on.

Drain plug handle made of 1018 steel knurled edges and TIG welded together.
06/21/2017

Drain plug handle made of 1018 steel knurled edges and TIG welded together.

Some 1018 steel tig welded support brackets.
06/21/2017

Some 1018 steel tig welded support brackets.

Final build up of a mounting bracket I did.
06/21/2017

Final build up of a mounting bracket I did.

It's been too long since I posted some work. Some steel legs with wheel mounting plates I've TIG welded.
06/21/2017

It's been too long since I posted some work. Some steel legs with wheel mounting plates I've TIG welded.

Its been awhile since I've posted something been extremely busy with family! But I'm back! And i will be posting as much...
06/03/2016

Its been awhile since I've posted something been extremely busy with family! But I'm back! And i will be posting as much of my recent work as possible!

Here is some recent tig welding.
#bluedemonweld #arc_zone #weldeveryday #welding #metalfabrication #metalfab #tigwelding #fabricationlife #fabrication #millerwelds #weldlicious #millerwelders

Timeline Photos
03/04/2016

Timeline Photos

Some #tigtuesday #tigwelding
02/09/2016

Some #tigtuesday #tigwelding

Some #tigtuesday
01/12/2016

Some #tigtuesday

Every damn time!...
12/18/2015

Every damn time!...

Mobile Uploads
10/21/2015

Mobile Uploads

Pypes exhaust system mocked up and tig welded together by me on a 71 camaro Z28.
10/04/2015

Pypes exhaust system mocked up and tig welded together by me on a 71 camaro Z28.

How about getting into the seasonal spirit with a custom horseshoe pumpkin? Message me if you want one made custom for y...
10/03/2015

How about getting into the seasonal spirit with a custom horseshoe pumpkin? Message me if you want one made custom for you.

Photos from Pure Octane Fabrication's post
10/01/2015

Photos from Pure Octane Fabrication's post

Photos from Pure Octane Fabrication's post
10/01/2015

Photos from Pure Octane Fabrication's post

Photos from Pure Octane Fabrication's post
10/01/2015

Photos from Pure Octane Fabrication's post

Photos from Pure Octane Fabrication's post
10/01/2015

Photos from Pure Octane Fabrication's post

Pure Octane Fabrication's cover photo
10/01/2015

Pure Octane Fabrication's cover photo

Pure Octane Fabrication
10/01/2015

Pure Octane Fabrication

Mobile Uploads
10/01/2015

Mobile Uploads

Address

2722 Pleasant Hill Rd
Hanover, PA
17331

Telephone

(443) 375-8721

Alerts

Be the first to know and let us send you an email when Pure Octane Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Nearby businesses